This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.
Description
Derailleur Shifter Cable Housing Kit
Every so often during your ride, you might have noticed delayed shifting or even jumping gears. Perhaps your gear cable is fraying and looking worse for wear? If so then it is time to upgrade and replace your shifter cable and cable housing. Choose between a variety of gear cable housing colors to match your bike.
With each set, you receive both front and rear inner shifter cables and 1 extra long 2500mm gear cable housing for your front and rear gears as well as clips, ferrules, and cable end crimps.
Alike your brakes, your gears need to be responsive and instant. To achieve the most responsive gear shifting Corki Cycles used 1.1mm stainless steel PVC-coated inner cables. This makes the shifting extra smooth with a rapid increase or decrease in gear. The front and rear cable and cable housing are also extra long to fit all bikes, including full-suspension mountain and road bikes.
Derailleur Shifter Cable Housing Kit Specification
The front inner cable is 2100mm / 82.7 inches long, the rear gear cable is 2100mm / 82.7 inches long and the cable housing is 2500mm / 98.4 inches long. The cable housing is 4mm in diameter. The cable housing internally has an inner layer for a better gear cable fit. The total shifter cable housing set weighs 121 grams / 4.26 oz.
The Corki Cycles bike shifter cable and cable housing is compatible with both Sram and Shimano derailleurs. Buy the Corki Cycles shifter cable for both your front and rear derailleur/gear shifters. Whether you have Shimano or Sram components this replacement front and rear bike shifter set will fit your bike.
Enjoy wear-resistant, cold-resistant, heat-resistant, and oxidation-resistant gear cables. Made to work and endure all conditions for every ride.
To install the new gear cable and housing you will need to pull out the old inner gear cable and remove the housing. Take the old cable housing measure against the new housing to see if length adjustments are needed. After ensuring the correct length attach the gear cable housing to your frame.
Next, attach the gear cable to your shifter and derailleur, threading through the gear cable. Secure the gear cable tightly with an Allen key on the derailleur. Adjust the gear cable tightening or loosening based on feedback from shifting the gear. Once the gears are set up perfectly attach the gear nipple and pinch with pliers. This prevents the gear cable from fraying at the end. Replicate again for your front or rear derailleur.
At Corki Cycles we believe in buying bicycle components, tools, and accessories that are strong and built for serious use. Nevertheless, as you push the limits of your riding, components, and tools inevitably break or are affected by general wear and tear. With every gear cable and housing kit, you receive a 1-year limited warranty. We also offer a component and tool replacement scheme where we provide a discount on your new bicycle component. Send our friendly customer service a message for further information.
Check out Corki Cycle's full range of disc brake pads to replace old or worn-out pads and have your braking set up sweet like your gears.
Specification
Features
FAQ's
Customer Reviews
Great product and great value, best price I could find. Same as any other cable and housing you are going to buy. In fact, it was there same brand that was factory installed on the bike. Took me 5 minutes to install the one cable and housing that I had that was damaged. Back one the road in less than a day from the time I placed my order.
I like it.
Nice cables. No issues at all
Good price and good product
Does everything it says make sure you have wire clippers these things are are hard to cut
Our Bicycle Products
